|
|
| Schaefer
Marine - Standing Rigging/Mast Hardware |
|
| Antenna
Mounts |
Our
brackets accept most GPS or VHF antennas with 1” (26mm)
x 14 thread. Convenient slot in the side of each unit allows
antennas to be mounted without feeding the entire cable
through base.
|
| Chainplates |
Made
from type 304 Stainless Steel tumbled and polished to a
high luster finish.
|
| Double
Jaw Toggles |
Similar
to our Eye Jaw design, Double Jaw Toggles are used with
the same pin sizes as marine eyes and mechanical end fittings
on 1 x 19 stainless wire. These type 316 stainless toggles
permit proper ”universal” motion in rigging
applications to help reduce wire, rod and end fitting fatigue.
Extra deep slot allows use in split masthead sheave boxes.
Toggle may be inverted to accept weldment tabs for chainplates.
|
| Eye
Jaw Toggles |
Made
of type 316 Stainless Steel, these high fatigue fittings
are designed for use with corresponding
pin sizes of swage or mechanical type marine eyes commonly
used on 1x19 stainless wire. Extra deep strap designed to
allow end-to-end assembly to Double Jaw Toggles.
|
| Link
Tangs |
Made
from type 304 Stainless Steel, Link Tangs are designed to
be used with our Eye Jaw Toggles, or in conjunction marine
eyes or mechanical end fittings of the same pin size commonly
used on 1 x 19 stainless wire. Sold in pairs with clevis
and cotter pins included.
|
| Quick
Release Pins |
One hand release! Just pull to release the pin. Made from
316 S.S. for corrosion resistance and strength. |
| Round
Utility Rings |
Perfect
for Adjustable Backstay configurations and many other applications.
Schaefer's High-Strength Stainless Steel Rings are welded
from Stainless Steel Rod then polished and buffed to a mirror
smooth surface.
|
| Stainless
Bails |
Perfect
for attaching blocks to your boom or boom vangs to your
spars, our stainless bails are formed from type 304 Stainless
Steel tumbled and polished to a high luster finish. Choose
from our stamped versions for dinghys and small daysailors
or from our exceptionally strong Heavy Duty Forged Bails
for larger cruisers or racers.
|
| Strap
Tangs |
Constructed
of type 304 Stainless Steel. Available in a wide variety
of widths, thicknesses and configurations. Each is radius
chopped, hole punched, tumbled and polished. 1/2”
(13mm) and 3/4” (19mm) wide tangs are 1/16”
(1.5mm) thick with 3/16” (5mm) dia. Holes at each
end. 1” (25mm) wide tangs are 3/32” (2mm) thick
with 1/4” (6mm) dia. Holes at each end.
|
| Triangle
Plates |
Manufactured
from type 304 stanless steel, Triangle Plates are designed
to be used with corresponding pin size of swage or mechanical
type marine eyes commonly used with 1x19 stainless wire.
Ideal for use with split backstays or triadic stays on ketch
rig boats. Sold in pairs with (3) three clevis and cotter
pins included.
|
|
|
| |
|
|
|
